|
|
Product : AT3600 Question : We have a client (Datatronics Romoland, Inc.) that has a handful of the AT3600 devices. We're needing to upgrade the PC that is used to calibrate the AT3600's. The existing PC has a PCI-GPIB card. The new PC will have Windows 7 with PCI-e slots so we'll need to upgrade the card to a PCI-e\GPIB card. Do you have any recommendations as to the a replacement card? Also does it matter if the PC is 32bit or 64bit? Thank you in advance for any details that you may provide.
|
|
|
|
 |  |
|
|
Hi Nathan,
We have tested the software on Windows 7 32 bit and everything is fine as long as the GPIB drivers support DOS mode. National Instruments GPIB drivers do have a DOS support mode that can be enabled in them, so in principle, any NI GPIB card should work. We have been using the NI USB-GPIB adapters very successfully (rather than installing a card inside the computer).
Best regards,
Tim.
|
|
|
|