|
|
Hello,Best wishes for 2015!When a transformer with unique serial-number is tested a unique report should be created.The report should includes at least the serial number, date/time, result and if applicable the failure. Test settings and measuring results are nice to have in the report.The preferred format for the report is XML.Is it possible and how to setup server software to generate these unique reports?Thank you for the support
|
| |
|
|
 | |
|
|
Hi Geert,
Happy new year to you too. I try my best to answer your questions as clearly as possible. You can get results for every transformer serial number as you require. We do not create XML directly, but we do generate CSV format files, and also write data to a database. Data can then be exported from the database in XML format if required. First of all the serial numbering and send results to server options need to be enabled in the Editor test program. A PC also needs the Server software installed and configured to communicate with the AT3600. When the program is executed, the test operator will be asked to enter the serial number (which can be entered using a bar code reader if required), and on test completion the results will be sent to the server.
The server software has options to control what to do with the results. As standard you can configure the "Standard results saving (CSV)" option. This writes all of the results in CSV format (although the files are named .ATR files). Database Results Saving is also available if you purchase the option. A 30 day of this option is available if you need it. I hope this has given you a good overview of the options. If you would like to go in any particular direction, there is good information available on this website to describe the operation, or you can always ask me if you are not sure about what's best for you.
Best regards,
Tim.
|
| |
|
|