We have an AT3600 that we use for running 4 resistance and 1 HPAC tests for each product.Ffor normal parts, we have no problems but whenever we have a reject from HPAC (especially when the result is "0" as leakage current), the cycle time extends a lot.
Normally the cycle is around 2.3-2.4 secs, but with these kind of rejects, it extends almost 0.5 second more. Is there a specific reason for this? As far as I know, when there is a direct short circuit the device goes in protection and displays "0". But what is the reason that the cycle extends so much?
By the way, Stop on fail is not enabled (because we use another software to transfer data, and it may cause some problems enabling it)