|
|
Product : AT Question : If I have written test program to test two parts at same time, is there a way to save results via Server Software for each part with serial number?
|
|
|
|
 |  |
|
|
Hi Cheryl,
There is not a direct way to do this at the moment. It is a future enhancement we are considering but will involve big changes to the firmware and software. The existing serial numbering system can help however. If serial numbering is enabled in the test program (through the program options Editor software menu) then the test operator will be prompted to enter the serial number of the transformer being tested. If he then concatenates the serial numbers of the two parts under test then you have a way to search for the results later. The first half of the serial number would relate to the part in position 1, and the first half of the test results. The second part of the serial number would therefore relate to the other part.
For example, transformer 1 has serial number TR1234, and transformer 2 serial number TR5678. When prompted the test operator will type in "TR1234.TR5678". Notice that I have also used the . character to separate the two serial numbers. Using this delimiter character will make automatic software separation of the two numbers a lot easier (as well as making the two separate numbers more visible to the human eye).
Best regards,
Tim.
|
|
|
|