How is the ESD connected from the AC Interface to the Industrial Test Power Amplifier made. Also, is it necessary to use relays when using the source?
The ESD connection from the AC Interface to the Power Amplifier is via a BNC connector located on the Industrial Test Power Amplifier. There is a hi connection and a 0V ground connection on the AC Interface which are the inner and outer of the BNC coaxial cable.
Voltage Taps in the Industrial Test Power Amplifier may be switched with relays via the AT3600 OUT port to control the power amplifier output voltage ranges.
Please also see Thread 1649 for details on using the User port and OUT tests.