AT5600 Demo

Demo - Fitting FIXTURES and TRANSFORMERS

1. Fit Test Fixture

The Voltech fixture system enables you to rapidly customise the AT5600 to suit an almost infinite variety of transformer styles.

Provided in the demo kit will be a custom fixture plate
This is designed to work with either
A) your supplied sample transformer
or
B) the Voltech Library Transformer you requested.

Fit the fixture to the test bay as shown.

Note that the 40 spring probes of the AT5600 interface with the 40 contact pins on the bottom of the fixture
The fixture should spring on these 40 probes when gently pushed down.

Hold the fixture down and rotate the two locking knobs to secure it in place.

2. Fit Sample Transformer

Also provided will be either

A) your sample transformer
or
B) Voltech Library sample transformer.

Fit this to the fixture as shown

Below are examples of the library transformers and fixtures for your reference

3. Voltech Library Samples

If requested, you will have also been supplied with the following (click image to zoom)

220-051 AT5600 SMPS Demo – Fixture
220-052 AT5600 SMPS Demo - Transformers

And/ Or

220-053 AT5600 Mains Toroid Demo - Fixture
220-054 AT5600 Mains Toroid Demo - Transformers

And/ Or

91-186 Universal fixture
78-030 Universal Test Lead Set

Back