AT5600 Demo

AT SERVER use

The following will walk you through running the same test program as before, but this time using the AT SERVER.

Here, The AT5600 will request the program, via the SERVER from the AT PROGRAMS folder, run it several times and send the results to the AT RESULTS folder that we have already set up.

1. SELECT TEST PROGRAM FROM SERVER

On the AT5600, select EXECUTE, click the part number of the test program, and then ENTER to select it

the AT5600 will beep and download the program, and then show the EXECUTE MODE screen, with the selected program part number shown.

2. RUN PROGRAM

Next will be shown a Compensation screen. Ignore this for now, by clicking DONE

Next press RUN on the front panel

The program will run and an overall test status will be shown on the screen.

3. RESULTS on AT5600

Press the RESULTS button to view the last run results on the AT5600

Then press BACK to return to the Execute screen

4. RESULTS on AT SERVER screen

The ATP program will have been supplied to you with "SEND RESULTS TO SERVER" enabled in the program options. (this is set per program by using the AT EDITOR). This is so that customers can choose if results are stored by specific part.

You will see that the same results also are sent to the AT SERVER with every RUN.

Press the RUN button on the AT5600 a few more times to test the part again and again, and hence send more results to the AT SERVER.
AS with the AT EDITOR runs, you will find that 2nd/3rd/4th runs are faster than the first.

5. RESULTS in AT SERVER folder

As well as showing the results on the AT SERVER screen, the results are also being written to a file in the specified results FOLDER.
This file will remain locked as long as the AT SERVER results window is open (although you can copy and paste it out of the folder)

Close the AT SERVER results window, by clicking on the red X in the top right corner of the AT results window.

Navigate to to the Desktop/AT RESULTS folder that we created earlier, and you should see a file of the forn "Cxxxddmmyy", where
"xxx" is the last digits of the AT5600 IP
"dd" is the day
"mm" is the month
"yy" is the year

6. VIEWING RESULTS in EXCEL

The file format of the results file (*.ATR) is actually the standard CSV (comma separated variables) format.

The file can easily be opened in EXCEL

EXCEL will also allow you to specify a delimiter, and hence tabulate the results by
a. selecting the first column
b. selecting DATA>TEXT TO COLUMNS
c. Selecting DELIMITED, then NEXT
d. select COMMA as a delimiter, then NEXT

the Yellow cells indicate where the data for Batch number and operator number and individual serial number would be stored if requested in the ATP program.

click image to ZOOM

Back