AT5600 Demo

AT EDITOR setup

1. AT EDITOR Installation

The AT Editor software allows you to create test programs (*.ATP files) for use with a Voltech AT Tester.
The AT5600 requires AT Editor version v3.56 or later

Legacy AT3600 and ATi customers should be aware that any programs created on earlier versions of AT Editor will still work on the AT5600, although the latest version of AT Editor and Server are required to communicate with the AT5600.

The AT Editor is free to download from our download page here
Click on the DOWNLOAD button and run the installer once downloaded.

Supports AT5600, AT3600, ATi.
MS Windows 7 / 8 / 10, 32-bit + 64-bit.

2. AT5600 USB Driver Installation

The AT5600 can be used over RS232, like the AT3600+ ATi.
However, to benefit from the improved speed of USB communications, install the AT5600 USB driver

The AT5600 USB driver is free to download from our download page here
Click on the DOWNLOAD button and run the installer once downloaded.

3. USB Check

Once installed, connect the USB cable provided to a USB port on PC you are using, and the other end to the USB port on the AT5600 USB-B port on the front right of the unit.

Turn the AT5600 power on, and the PC will automatically detect the AT5600 and assign a COM port to it.

This can be seen in Windows Device Manager on the PC, under the Port (COM and LPT) grouping.

In the shown example, the AT5600 is assigned COM3

Back