3 Constant current testing with up to 2A drive
2A is the maximum available from the AT3600 or AT5600's
Greater than 2A can be delivered for testing by using an
external source (as described in a later section) or simply by using
multiple turns of the drive signal through the transformer or core under
Programming the current is simple using the Voltech AT
Editor and limits may be set as RMS or mean-scaled RMS.
Once downloaded to the AT as part of a program, the test
will be performed automatically with the constant current ramped up and
down smoothly and quickly.
Comprehensive measurement results may be stored and
analyzed later if required