HPAC High Voltage AC safety testing
Ensures that the windings are positioned correctly with
the correct materials to provide the required level of safety isolation.
Unit of measurement, Amps. Range 10uA to 10mA with a signal level from
100Vac to 5kVac.
All transformers that provide isolation from an AC power
system must be tested to confirm their ability to withstand safety-testing
voltages without breakdown. In order to meet testing regulations, it is
necessary to provide evidence that the test voltage is maintained during
the test period and the AT3600/AT5600 achieves this by measuring and
controlling the applied voltage throughout the complete duration of test.
Figure 12 Example test entry screen for HPAC using the