7.0 Specifications
Output Capability: 0 to 25A; in 10mA steps.
Accuracy on Supplied Current: �0.5% of reading �25mA.
Compliance voltage: 5V pk.
Effect of the DC1000 on Inductance Readings
The affect the DC1000 has on an inductance reading is dependant on the
test Voltage and frequency.
Fig. 17 should be used to determine the affect for a particular test.
DC1000 Error Current

Fig. 23
Example:
Measuring the inductance of a 2μH inductor at 0.2V, 100kHz:
Z = 1.2566Ω
@ 0.2V, i = 159.155mA
From fig. 23, the error current = 0.45μA/mV @ 100kHz
Which, for a signal of 0.2V = 90μA
Error in measurement = 90μA / 159.155mA = 0.057%
Environment
Temperature: +5� to +40�C operating
Humidity: 10% to 80% RH non-condensing
Power Supply to Case: 2.9kV DC for 1 minute.
Power Requirement: 100-125V / 200-250V AC 48-65Hz. 400VA
Max.
Supply Voltage
Input Voltage: 100-125V / 200-250V AC 48-65Hz
Input Power: 400VA Max.
Fuse: 4AT
Environment
Temperature: +5� to 40�C operating
Humidity: 10% to 80% RH non-condensing.
Dimensions
Height: 88mm
Width: 475mm
Length: 255mm
Weight: 10kg
Interfaces
RS232 connection to ATi or AT3600 Transformer Testers
Safety Interlock
Protection for operators from back EMF when interlock connected to safety
cage.
Variable Speed Cooling Fan
Runs fan at variable speed dependent on load and temperature for minimal
noise.
EMC COMPLIANCE
The DC1000 complies with the limits of BS EN 55022 Class A.
� |
� |
� |
� |
DECLARATION OF CONFORMITY
|
� |
Manufacturer's Name |
� |
Voltech Instruments, Inc. |
� |
� |
� |
� |
� |
Manufacturer's Address |
� |
11637 Kelly Road
Fort Myers FL
USA |
� |
declares, that the product |
� |
� |
� |
Product Name: |
� |
Precision DC Bias Current Source |
� |
Model Number: |
� |
DC1000 |
� |
conforms to the following Product Specifications |
� |
Safety: |
� |
BS EN 61010 (1993) |
� |
EMC: |
� |
BS EN 55022 (1995): Class A |
� |
� |
� |
BS EN 50082-2 (1992) |
� |
� |
� |
� |
� |
Supplementary Information: |
� |
The product herewith complies with the requirements of
the EMC Directives 89/336/EEC and 92/31/EEC and the
Low Voltage Directive 73/23/EEC |
� |
Signed for on behalf of Voltech Instruments, Inc. |
� |
|
� |
22 July 2005 |
� |
� |
Voltech Instruments, Inc. has an intensive program of design and
development that may alter product specification.
Voltech Instruments, Inc. reserves the right to change the product
specification at any time, and without notice.
No part of this publication may be produced or transmitted in any form,
or by any means, electronic, mechanical, photocopying, recording or
otherwise, without prior permission of Voltech Instruments, Inc.
� Voltech Instruments, Inc. 2010.