Voltech logo
    • Login
  • Welcome
  • Applications
  • Products
  • Support
  • Contact Us
Voltech logo
  • Welcome
  • Applications
  • Products
  • Support
  • Contact Us
Contact Voltech
USA 1-239-437-0494
EUR 44 1235 861173
ASIA 44-1235-364-001
or
Email Voltech
Voltech on LinkedIn Voltech on YouTube Voltech on Twitter
    • Login
Technical Document Reader
Document
098-024
Name

AT3600 User Manual

Description
The full user manual for the AT3600 transformer tester.
AT3600 User Manual
Back
to Index
Skip Navigation Links.
Expand 1 Introduction1 Introduction
Expand 2 Getting Started2 Getting Started
Expand 3 Test Program Editor3 Test Program Editor
Expand 4 Using the Server4 Using the Server
Expand 5 Fixtures5 Fixtures
Expand 6 Front Panel Operation6 Front Panel Operation
Collapse 7 Tests and Test Conditions7 Tests and Test Conditions
Collapse 7.1 Transformer Tests7.1 Transformer Tests
7.1.1 Application Of Tests
7.1.2 Continuity
7.1.3 Winding Resistance
7.1.4 Equivalent Resistance
7.1.5 Inductance
7.1.6 Inductance With Bias Current
7.1.7 Quality Factor
7.1.8 Dissipation Factor
7.1.9 Leakage Inductance
7.1.10 Inter-Winding Capacitance
7.1.11 Turns Ratio
7.1.12 Turns Ratio By Inductance
7.1.13 Impedance - Impedance With Bias
7.1.14 Dc Resistance Match
7.1.15 Inductance Match
7.1.16 Capacitance Match
7.1.17 General Longitudinal Balance
7.1.18 Longitudinal Balance
7.1.19 Insertion Loss
7.1.20 Frequency Response
7.1.21 Return Loss
7.1.22 Impedance Phase Angle
7.1.23 Inter-Winding Phase
7.1.24 Trimming Adjustment
7.1.25 Output To User Port
7.1.26 Insulation Resistance
7.1.27 Hi Pot (DC)
7.1.28 Hi Pot (AC)
7.1.29 Surge Stress Test
7.1.30 Wattage
7.1.31 Wattage (External Source)
7.1.32 Stress Wattage
7.1.33 Stress Wattage (External Source)
7.1.34 Magnetizing Current
7.1.35 Magnetizing Current (External Source)
7.1.36 Open Circuit Voltage
7.1.37 Open Circuit Voltage (External Source)
7.1.38 Low Voltage Open Circuit
7.1.39 Leakage Current
7.1.40 Inductance With Ext Bias (Series Circuit)
7.1.41 Inductance With Ext Bias (Parallel Circuit)
7.1.42 Impedance With External Bias
7.1.43 Hi Pot Ramp (AC)
7.1.44 Hi Pot Ramp (DC)
7.1.45 Voltage Break Down (AC)
7.1.46 Voltage Break Down (DC)
Expand 8 Specification8 Specification
Expand 9 Warranty and Service9 Warranty and Service
Expand 10 Safety Systems10 Safety Systems

7.1.41 LPBX - Inductance With External Bias (Parallel Circuit)

DC Bias Measure Range Test Voltage Test Frequency Basic Accuracy
0.1A to 250A 1nH 1MH 1mV to 5V 20Hz to 3MHz 0.2% @ Q>10

This test requires the use of one or more Voltech DC1000 Precision DC Bias Current Sources. Contact your Voltech sales office for details.

The inductance of a transformer winding while an external bias current is flowing through it may be tested using series or parallel equivalent circuit models. Initially the DC bias current is set up and allowed to stabilize. An AC voltage is applied across the selected winding; the voltage across and current through the winding are then measured using harmonic analysis. The measured voltage is divided by the current to obtain a complex impedance and the inductance is calculated.

Prev Next
Email Voltech
USA 1-239-437-0494
EUR 44 1235 861173
ASIA 44-1235-364-001
Site Map
Terms Of Business
Terms Of Use
Privacy
  • Terms Of Use
  • Privacy
  • Terms Of Business
  • Site Map
Contact Voltech
USA 1-239-437-0494
EUR 44 1235 861173
ASIA 44-1235-364-001
or
Email Voltech
 
Submit "Red" = required field
Please, complete all required fields.
Please, select country from the list.
Please, enter a valid Email.
Thank you for your question. We will reply to your request as soon as possible.
An error occurred.
Voltech © 2021
Voltech on LinkedIn Voltech on YouTube Voltech on Twitter
We have placed cookies on your computer to help make this website better.
Please read our Privacy Statement for further information. Otherwise, we'll assume you're OK to continue.
OK, Don't Show This Message Again