3.3.2 Program Edit
After you have created the program schematic, and selected the program options, you may then start creating the actual program of tests.
To edit the test program, you must first switch to the Program Editor.
From the Top Level menu bar, select:
Program > Edit
You will now see a display with three separate windows:
||A simplified view of the transformer schematic omitting the wiring to
This is a passive window intended to be used as a memory aid; it
cannot be used to change the schematic. (If you need to alter the
schematic at any time, simply click on ‘Schematic’ then 'Edit' in the
Top Level menu.)
||The Program Window.
This is the list of tests which currently make up the test program.
Normally, for a new program, this window would initially be empty.
The display above shows the program of one resistance test created in
the Quick Start Tutorial.
||The Available Tests Window.
This is the list of tests which are available to be used in creating or
modifying the test program.
From this display, you may now create the test program suitable for your transformer by adding tests to the Program from the Available Tests list. The following sections describe how to do this.