AT3600 User Manual

Description

The full user manual for the AT3600 transformer tester.

AT3600 User Manual

Back
to Index

1 Introduction

1.1 General

1.2 AT3600 Features Summary

1.3 Overview

1.3.1 Topics Covered In This Overview

1.3.2 Behind The Front Panel

1.3.3 How Does The AT3600 Tester Run A Test

1.3.4 Creating Programs - The Editor

1.3.5 Storing Programs And Results - The Server

1.3.6 Transferring Programs Between Editor And Server

1.3.7 Executing Programs

1.3.8 Test Fixtures

1.3.9 Operating The At Series Testers In Production Test

1.3.10 Operator Safety

2 Getting Started

3 Test Program Editor

4 Using the Server

5 Fixtures

6 Front Panel Operation

7 Tests and Test Conditions

8 Specification

9 Warranty and Service

10 Safety Systems

1.3.5 Storing Programs And Results - The Server

The Editor software previously described, allows you to create and evaluate each individual test program. It is not intended to manage the large numbers of test programs that may be required on a daily basis once they are in ‘production’ use. This is the function of a second PC program supplied with your AT3600.

Usually, the Server would be installed on a PC with access to a large disk, which could be attached to the PC itself, or connected via a network. The Server (and disk) could then be optionally used for either or both of two purposes:

To provide the master archive for test programs
To archive test results

The tester has a separate 'Server' port on its rear panel for connecting to the Server.

Prev Next