|
Computer control is via SCPI type commands that provide a comprehensive suite of control methods over and above those that can be accessed via the front panel.
PC Software is available here.
The interfaces are slot-in cards that fit directly into the opening at the rear of the analyzer. Once fitted and screwed in place, the analyzer will automatically recognize the interface and be ready to work. Only one interface may be fitted to a PM100 or PM300 at a time.
IEEE488 Interface $770.00
Estimated Lead Time: 7 days
- Implements the IEEE488.2 standard. Fully compatible talker/listener
- High speed data to and from an IEEE controller
- Bus address (2-30) selected via the front panel and stored during power off
- RS232 and Printer interface
Click here for the IEEE488 datasheet.
RS232 & Parallel Printer $514.50
Estimated Lead Time: 3 days
RS232:
- Connections on a male 9-way 'D' - type connector
- Configurable as a printer output for serial printers
- Baud rates selectable via the anlyzer's front panel and stored during power off
- 1200, 2400, 4800, 9600, and 19200 baud
Parallel Printer:
- Standard computer type 25-way ‘D’ type connector
- Output of ASCIII data to most printers with a centronics type (parallel) interface
- Prints user selected numeric information in an 80 column format
Click here for the RS232/Printer datasheet.
|
